Model: SMG-042FAAC

Compatible FAAC 868Mhz FAAC SLH Remote Universal Gate Garage Door Opener Remote Control

Product Introduction
  • Product name: Compatible FAAC 868Mhz FAAC SLH Remote Universal Gate Garage Door Opener Remote Control
  • The design with AB rubber button, LED Indicator. The usage life of the button is 100, 000 times.
  • Third party remote control for 868Mhz FAAC SLH Remote. NOT made by FAAC.
  • Transmit distance – 30-50m (Open space)
  • Compatible Models:XT2 868 SLH
    XT4 868 SLH
    XT2 868 SLH LR
    XT4 868 SLH LR
    DL2 868 SLH
    DL4 868 SLH
    T2 868 SLH
    T4 868 SLH
    TML2-868-SLH LR
    TML4-868-SLH LR

Product Information

  • Product Name: Compatible FAAC 868Mhz FAAC SLH Remote Universal Gate Garage Door Opener Remote Control
  • Material: PVC
  • Frequency: 868mhz
  • Net weight: 30g
  • Modulation System: ASK
  • Operating Current:<25mA
  • Transmit power: >=10mW
  • Transmission speed: 50-60KHz
  • Frequency windage: ±0.2MHz
  • Transmission distance: 100 meter(open space)
  • Standby current: less 2uA
  • Transmission current: less 10mA
  • Stable circuit, high accurate and high-effective, individuation and humanization design, bringing you much convenient
  • Adopts imported high-frequency triode, owning 13dbm Transmitting Power
  • Easy to use: Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage
  • Widely Use: Perfect Suitable for controlling electrically operated gate, retractable door, garage door, electric curtain automobile, motorcycle and other telecommand equipments.
  • The programming procedure is same as original FFAC remote
     SYSTEM CODING:
    1) Simultaneously press push-buttons A and B of the master TX and release them when the LED flashes (after about one second)
    2) Press and hold down the learning button on the decoding card/RP receiver: the LED must flash
    3) While the master transmitter’s LED is flashing, press and hold down a channel (the TX’s LED goes on with steady light);
    4) Before releasing the learning button on the decoding card/RP receiver, check if the LED goes on with steady light for a couple of seconds to confirm that the “site code” was saved.
    5) Release the button of the master TX channel.
    TX CODING:
    1) Simultaneously press push-buttons A and B of the master TX used for coding the system and release them when the LED flashes (after about one second)
    2) Frontally bring into contact the master TX and the TX to be coded (master or slave)
    3) On the master TX (while its LED is flashing), press and hold down the same channel used for coding the system: the LED goes on with steady light
    4) Press the required channel on the TX to be coded and release it when the LED goes off after flashing twice to confirm the “site code” was saved;
    5) Release the button of the master TX channel
    6) Repeat this procedure for every TX to be coded.

WRITE TO US

Scimagic Company is a leader in the wireless solutions industry, providing unique, application-focused engineering and systems integration capabilities.  We are able to meet diverse customer requirements by continually expanding our product and service offerings.

  Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District, Shenzhen, Guangdong, China

 +86-755-84505252      +86-15217232729       larissa04191

 8615217232729            1878045466                larissa04191

 larissa@scimagic.com.cn

Copyright © Scimagic | All Rights Reserved