Single beam photocell sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.
Narrow infrared beam (I or II) can avoid interruption by external light.
Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-10meters).
The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.
1.For security, please read the user manual carefully before initial operation;
2.This photocell is without any fuse,so Please make sure the power is off before installation;
3.Only used this system that do not cause any danger life or property during the running failure or its security risks eliminated;
4.Please guarantee the products used in effective working range
Installation instruction
4.1 Receive module J4 in above picture is the option switch for NO and NC of photocell switch.
4.1.1When the short circuit cap on NO,it is normally open.
4.1.2 When the short circuit cap on NC,it is normally closed.
4.2 Installation
4.2.1 The photocell should be installed more than 20cm above the ground (to avoid reflection), and the distance between emitter
and receiver should be more than 50cm.
4.2.2 End user should install the photocell receiver on the back of the direct sunlight or other strong light source(±5-) to keep photocell work well steadily.
4.2.3 Avoid installing other infrared photocell emitters within the effective distance of receiver.
4.2.4 If the end user need to install other photocells in one same straight line , the receivers could be installed in the two ends and the emitters could be back-to-back installed.
4.2.5 Stable installation could avoid the signal of emitter and receiver skewing due to lightly vibrate and the malfunction.
4.2.6 When the product is install in some place with angle , end user could adjust the PCBA to make the installation better.
4.2.7 Connect the power after the inspection, when short circuit cap at NO, After the battery is installed on the LED lamp of the transmitting module, the LED lamp lights up for 0.5 seconds and then goes out, receiver module LED turns on, receiver module contact at off; when make the cap of emitter and receiver in alignment, receiver module LED is off, NC/NO is on ;when something or someone shelter the sensor, receiver module LED will turn on , NC/NO contact is off. When short circuit cap at NC, the state of NO/NO is opposite to the above phenomenon.
Packing
There are different packings.
Shipping
We ship it with express like DHL, TNT, Fedex, UPS….It takes 3-5 working days normally.
Also can ship with air cargo.
Customer can arrange for pick up from our factory
Payment
Bank transfer
Western Union
Paypal
Alipay
Other payment term can be negotiated
Our Factory
ShenZhen Scimagic Development Technology Co. Ltd is a munufature of wireless remote control system and other accessories for automatic door and gates for more than 10 years, and enjoy a very good reputation in this field.
Why choice us?
OEM and ODM are acceptable (We decode many branded remote controls like BFT, FAAC, V2, DITEC, NICE….and produce compatible remote with cheaper prices)
Minimum Order:100 pcs (accept trial order), for normal items, mixed order is acceptable
Production time: within 2 working days for small quantity (our prodcution is very quickly for small order, all raw materials are in stock, it can be ship in 2 working days, sometimes at the same day when you order, for special order, it takes about 10-15 working days)
Skilled sales person (It’s very easy for to communicate and all emails will be reply within 12 hour in business days )
All our products are passed 2017 New RED standard CE certificate and FCC certificate, you can check all certificates on our website or contact us.
1 year Warranty for all of our production, full refund if goods can not be used.
Scimagic Company is a leader in the wireless solutions industry, providing unique, application-focused engineering and systems integration capabilities. We are able to meet diverse customer requirements by continually expanding our product and service offerings.
Honghai Gebu Building 1406, Baoan Road, Songgang Baoan District, Shenzhen, Guangdong, China